Toggle Nav
Cart
Trophies and Awards

How to Assemble A Perpetual Trophy

Attaching the figure to the base:

We send many of our perpetual trophies in two parts, unassembled, in order to protect them during shipping and prevent breakage.  Customers must attach the figure to the base using the included epoxy glue.  Here is a short video showing the gluing process step-by-step:

Enclosed with the order is a high strength and fast drying epoxy glue.  Read the instructions on the packet carefully. 

Directions:

  • Fold packet in half; cut open one end.  Squeeze both sections of adhesive together on a piece of scrap cardboard.  Use the enclosed wooden stick to mix the 2 parts together by stirring.  This activates the epoxy.
  • Apply a thin layer of epoxy to the bottom of the figure.  Carefully position the figure on the base.  Hold in position for a couple of minutes to let epoxy set.  Then let completely dry for an hour.
  • It is recommended that you do not use tape to position the figure on the base while the epoxy is setting up.  The base has a very thin veneer that will peel off with tape. 
  • Always lift and carry the trophy by the base.

If you have any questions, please contact Customer Service at 1-877-926-4700.